This test method determines the direct tension concrete surface tensile strength to the prepared surface.
Source: ASTM International
This test method is used to measure the relative bond strength of roller-compacted concrete to other roller-compacted concrete by using a point load test at the joint
Source: ASTM International
This spreadsheet provides an easy to use tool to develop RCC Mix Designs following the Soil Compaction Method. It allows you to evaluate multiple aggregate combinations and then helps you incorporate the information obtained from the Modified Proctor to develop the Final Mix Design.
Over the years, roller-compacted concrete (RCC) has been used successfully for the construction of industrial pavements such as log sort yards, military hard stands, or container yards …
Source: Portland Cement Association
RCC quality control and quality assurance requires extensive testing of individual ingredients – aggregates, cementitious materials, water, and admixtures; and testing of the RCC mixtures to determine the properties of fresh and hardened RCC.
Source: RCC Pavement Council
This practice provides standardized requirements for molding stiff to very dry consistency concrete mixtures commonly used in
roller compacted concrete construction. Learn more on RCC Cylinder Molds Practice.
Source: ASTM International
These test methods cover lab soil compaction test methods used to determine the relationship between water content and dry unit weight of soils (compaction curve).
Source: ASTM International
Materials and mix designs from two industrial paving projects were used to prepare specimens for comparison. Results indicated that the gyratory compactor produced specimens with RCC mechanical property density affects consistent with those achieved in the field.
Source: PCA, Nader Amer, Christopher Storey, and Norbert J. Delatte, Jr.
The main objective of this water permeability evaluation was to research the very low water permeability coefficients encountered in high performance concrete.
Source: Service d’Expertise en Materiaux inc.
A key to design and construction using RCC is the application of density testing procedures for both laboratory and field density that is representative of in-place conditions. Several test methods developed over the last 20 years are described in this publication.
Source: Portland Cement Association